How To Install Electric Fence

How to install electric fence like a pro? What are the tips, the tricks and the care needed in time to install an electric fence properly? How to install electric fence safely? How to make the maintenance of an electric fence?What are the main causes of firing an electric fence and how to avoid them?

To answer all these questions we have prepared a very thorough article with many tips for you to learn how to install electric fence properly.

Time to make the installation of an electric fence is very important to observe some details. Among the top tips on how to install electric fence properly we can highlight:

Use shock plants certified by Inmetro;

Use high quality insulation cables with thick gauge;

Avoid using very thin stems, giving preference to massive rods;

Give preference to insulators of polyester;

For proper operation of electric fence is essential to the job of high insulation cables and insulators with minimum insulation 15KVolts;

Use automatic fountains to keep about always stretched, as well as the visual question, about loose shock sensation decreases;

The thickness of the steel wire must meet strictly the extent of electric fence according to the manual of the shock used;

It is important to purchase a controller according to the extension of the electric fence. Check on your appliance description the maximum length supported wiring.

Before you start to install an electric fence or perform any type of repair is recommended to remove the battery, disconnect the power plug, turn off the circuit breaker or any other unit responsible for supplying electric power to shock;

Do not install in any metal structure to avoid leakage of voltage;

Observe a minimum distance of 4 cm between cables of high insulation, and never pass them along with other cables, for example, power cables, telephone, siren, alarm sensors etc;

The distance between the shock and the electric fence shall be of a maximum of 70 metres;

It is important to make the ground properly, using the neutral as Earth, as this is prohibited by law;

The correct grounding is essential to the feeling of shock and this should be done through cobreadas bars of 2.4 meters connected to terminal equipment.

The grounding bars should be installed preferably in a moist soil, 4 metres between you and there are 10 metres from another type of electrical grounding;

The height between the floor and first filament electric fence should be at least 2.10 m.

In the case of Division of walls, the electric fence should always be installed from your side of the wall, i.e. inside;

In the absence of the consent of the neighbour, the fence should be installed “tumbled” in an angle of 45 degrees toward the inner part;

The warning signs must be fixed at least every 4 metres if the electric fence is in a public place and 10 metres in other cases;

The distance between the rods must be a maximum of 2 metres;

It is prohibited the installation of electric fences less than three meters of liquefied petroleum gas containers.

The shock must be installed at a distance of at least 3 metres of any electronic device such as discadoras and receivers.

The choice of the place of installation of the shock is also very important in time to install your electric fence and the hint that we give is:

Choose a discreet location that do not call attention;

Choose a location protected from the weather;

Choose a semi-open location on the outside of the property;

Attach the shock on the wall;

Choose an easily accessible location to do any maintenance or monitoring;

Choose a location away from access by children or animals;

Choose a remote location at least 3 meters of any electronic device such as discadoras and receivers;

Do not install the central eletrificadora by the electric power distribution box;

Do not install the fence near gutters or plants, keeping a distance of at least 10 cm.

Do not install the shock inside wooden furniture such as cupboards, as there is the risk of a spark to cause a fire;

For the same reason do not install shock Center near flammable products.

After the installation of the electric fence it is recommended to test it:

Make an inspection in your electric fence across your extension to identify if there are amendments or vanishing points (sparks);

Check the mechanical voltage wiring;

Test your clock controller causing a short circuit between the fence and ground wiring;

Check that the sensors, batteries and remote controls are with battery charged and working.

How To Install Electric Fence Safely

To install an electric fence in your House it is necessary to take some measures in order not to endanger innocent people or affect the lives of who “tried his luck” to skip your wall.

The ABESE, Brazilian Association of Electronic Security Systems, argues that it is important to note some care adopted by other countries such as, for example:

Do proper signaling equipment warning about the existence of the risks involved;

Install at a minimum height of security compatible with the location;

Taking simple care on a day-to-day basis how to turn off the equipment when it is cut down nearby trees etc;

Find electric fence installation companies authorized to do so.

Causes Of False Triggering Of An Electric Fence

It is very common to happen false triggers, but let’s list what are the main causes of this shoot for you to avoid that they occur:

Dead batteries;

Faulty insulators;

Tree branches in contact with the fence;

Lack of proper grounding;

Voltage leak;

Dangling wires or loose;

Problems with the shock.

Periodic Maintenance Of Electric Fence

Like any other equipment, it is necessary to make a maintenance from time to time to ensure the efficiency of the system and avoid failures.

Many people, when they saw the light flashing shock Center, believe that the system is working perfectly, but often is not shocking or firing.

It is wise to do system maintenance whenever possible.

Only by testing, surveys and changing accessories at the correct time, you can keep your electric fence running true.

The main recommendations for you to keep your system always working is:

Make a test firing and sparking whenever possible;

Check the wear level of high insulation, as are exposed, may have small ruptures. If that’s the case, make the switch for high quality insulation cables with a thicker gauge.

Verify that the wires are properly tightened. If not, use fountains to keep them straight, as if to keep them loose and trigger sensitivity will be undermined;

Verify that the wires are in good condition. The filaments oxidize over time and create a layer that will isolate a leak in the body of the person. It is recommended to clean this filaments with a steel sponge, once a year, at least, and change the same every 5 years;

Check if the battery charge of shock, of the sensors and remote controls are loaded. It is recommended to Exchange central battery, at most, every 2 years;

Note If the insulators are not dry or broken and make the exchange for new ones whenever possible;

Check the quality of the ground doing the “lamp test” and find a moist spot if necessary a new grounding;

Note If there is no next tree branches that can pull over with the wind force on the electric fence.

Check if the electric fence has no seams or presents sparks across your extension.

In this article you learned how to install electric fence like a Pro, how to make the maintenance of your electric fence properly, how to install electric fence safely and how to avoid false shots.

If you liked the article, let your compliment in the comments field below and share this article in their social networks.